Planning & Designing Your Kitchen

Kitchen Planning Basics Remodeling a kitchen may include anything from repainting the walls to redesigning the entire structure of the house. Space limitations prohibit covering every issue you might have to deal with, but this brochure will cover the basic principles of design, as well as the general considerations involved in planning a new kitchen. The process of planning a kitchen is basically one of determining how you use your kitchen (The answer involves more than just "cooking") and what features you'd like, then deciding on your priorities so you can fit as many features as possible into your budget. Virtually anything can be done to a kitchen - walls can be moved, plumbing can be changed, and electrical service can be added, for example. But the less you spend on major structural or mechanical work, the more money you'll have to put into better cabinets, higher - grade flooring, and more stylish and functional fixtures. The following lists of questions will lead you through some of the issues you'll have to resolve before you're ready to design your new kitchen. There are no right or wrong answers - only your preferences. Carefully consider each question; make notes as you go, and don't be shy about changing your mind. A kitchen is the most complex and the most used workshop in the house, and it's important that your remodeled kitchen matches your needs and lifestyle as closely as possible.

The first step is to consider how you use your kitchen: How many people are in your household who use the kitchen? The answer to this question will determine how much use your kitchen gets, and how much traffic there is likely to be in the kitchen at any one time. Do two or more cooks typically work at the same time? If so, you may want extra counter space and /or an extra sink. Do you entertain frequently - and do you typically have formal or informal gatherings? If you entertain a lot, you may want to open up the kitchen/living room area into a great room that lets you be part of the party while you're working. What other activities commonly occur in the kitchen? some houses have a laundry closet in the kitchen. some people want a wet bar, a breakfast bar, or even a desk for writing or computer work. Do you have any special needs? Is a user exceptionally short or tall, and uncomfortable working at standard-height counters for long periods of time? Do you have a handicapped or elderly household member who may have special needs? This, obviously, is not a complete list of the general considerations in kitchen planning - the list is nearly infinite. But before you begin designing, think about who uses the kitchen and how they use it.

Next, think about the features you want Do you need an island (and have room for it), a peninsular, or breakfast nook? Would you fill a pantry? Would you rather have a stainless steel sink or enameled cast iron? Do you use a microwave for major cooking or just to heat up cups of tea? Do you prefer cooking with gas or electricity? Do you want a combination oven-and-range, or a cook top with a wall oven? Do you use enough small appliances that you could use an appliance garage to store them? The fewer structural and mechanical changes you make, the less you'll spend. But that doesn't mean that all those changes cost a lot of money. You'll need the advice of licensed professionals to make final decisions, but you can at least get a rough idea of how much extra major changes would cost by answering the following questions: Is the wall you want to move a load-bearing wall runs the moving them is a complex job for a professional. Typically, an interior load-bearing wall runs the length of the house, at about the center of the structure. What rooms are directly above and below the kitchen? If the rooms above and below are finished, it'll be a lot more difficult to reroute plumbing pipes, heating ducts and electrical wires. Does your new design require that you move existing doors and /or window? If so, this makes the job more difficult, because exterior walls are always load-bearing.

The next step - and the most fun - is to think about style. Chances are, you've seen kitchens that you like, in magazines, at friends' homes, etc. The first question to ask is whether the style you like best will fit with your home. You may have loved European cabinets in the magazine, but they might not look as good in you Queen Anne Victorian. Also, consider what kind of color changes you'd like to make - and also whether your ideal colors would necessitate buying new appliances. When you choose colors, think of them in relation to surrounding rooms and try to find colors that complement the rest of the house. Finally, consider your budget and any other remodeling that you might want to do. Sometimes, related projects are easier and cheaper when done at the same time as the kitchen.

Most kitchens are designed around four work centers: THE CLEANUP CENTER around the sink should have at least 18" to 30" on one side, and 48" to 54" on the other, to allow enough room to stack dishes, pans and utensils. Always plan for at least 12" between the sink and the nearest corner, measured from the front of the counter. THE COOKING CENTER around the range requires 12" minimum on one side of the range, and 15" to 24" on the other side, again with 12" minimum to the nearest corner. Microwaves and built-in ovens should have at least 15" to 18" counter space on the right side (assuming the door is hinged on the left side). THE STORAGE CENTER around the refrigerator needs 15" to 18" on the handle side of the refrigerator, to set food. THE MIXING/PREPARATION CENTER should be handy to pans, bowls and utensils, and should consist of at least 42" to 84" of free counter space. If space permits, some designers also include a serving center-another 36" to 84" of free counter space to set bowls and pans. As you design, you'll also want to plan for the following minimum clearances so you'll have room to work: There should be at least 42" clearance from the front edge of the counter top to the nearest table or island. Leave at least 20" from the front edge of the dishwasher door (when open) to the nearest table or island. Plan for at least 26" between the kitchen work area and the nearest traffic path. Allow 36" between the nearest obstruction and an eating table, so there is room to pull a chair away from the table.

Kitchen layouts are based on a concept called the work triangle. The work triangle consists of imaginary lines that connect the refrigerator, the range, and the sink. For maximum comfort and efficiency, the three legs of the work triangle should total between 23 and 26 feet. There are four basic kitchen layouts (Figs. 1-4): 1) the one-wall or galley, the corridor, the L-shaped, and the U-shaped. There are, of course, a nearly infinite variety of layouts, but most are based on these four. Cabinets can also be divided into basic types. Assuming that you're considering modular (pre-manufactured) cabinets rather than custom, the widths will run in 3" increments from 9" up through 3". The standard height of a base cabinet is 34-1/2", and the standard depth is 24". Wall cabinets are 12" deep (except for 24" specialty cabinets designed to be installed over the refrigerator), and come in the same 3" increments. Standard heights are 12", 15", 18", 30" and 36". Wall cabinets are installed so the bottom of the cabinet is 54" above the floor (about 18" above the counter top). The height you select should depend on your ceiling height and how tall you are - there's no point in buying tall cabinets that reach to the ceiling if you can't get up to get items in and out of the top shelves.

There are four basic types of base cabinets: A standard base has one drawer, with a door and shelves below. A drawer base has three or four stacked drawers. A sink base is open below, with a door below a single false drawer front. In some brands, the drawer front tilts out to provide storage for sponges and cleaning supplies. A corner base fits in a corner. It may have a lazy susan inside or shelves. Naturally, there are a wide range of variations on these four basic styles (fig. 6).

Wall cabinets (Fig. 7). generally have doors and shelves inside, although lazy susan corner cabinets are also available, as well as a wide range of specialty cabinets that may offer built-in appliance garages, stemware holders, and other features. Special wall cabinets are also made for microwave and built-in ovens, range vent hoods, and other special uses.

The first step in kitchen layout is measuring your kitchen. You'll need to make a sketch of the room, using graph paper and counting each square as 3". Measure the following dimensions: HORIZONTAL DIMENSIONS (Fig 8): 1 Each wall from corner to corner. 2 From the nearest corner to the outside edge of each door or window casing. 3 The overall width of the doors and windows, including the casing. 4 From the nearest corner to the centers of water supply lines, drain lines and gas feed lines. 5 From the nearest corner to the centers of electrical outlets and switches. VERTICAL DIMENSIONS (fig 9) 6 From the floor to the ceiling. 7 From the floor to the bottom edge of window stools or casings. 8 From the ceiling to the top edge of door and window casings. Once you have those dimensions, you're ready to do a basic layout. First, make a few copies of your sketch, so you can play with different ideas. You can also make cardboard cutouts of your appliances, sink and basic cabinet sizes (to scale), and move them around on your sketch. Decide on the general location of each of the work centers. Make sure that the layout fits general guidelines, and that no structural or other considerations prevent you from building your layout.

Next, determine the rough position of the major appliances (refrigerator, range and oven) and the sink. Double check the layout to make sure you've allowed the proper amount of counter space in each work center, as outlined above. Also, double check to make sure your work triangle is within guidelines. Plan a sink base cabinet under the sink then choose the types of cabinets that will go near each appliance. Work from the nearest corner to the sink and each appliance, sizing the cabinets so you are left with a gap at the end that is less than 3". You'll use a filler strip that matches the cabinet finish to fill those gaps. Make sure each type of cabinet fits the needs at that work center- mixing bowl and utensil storage near the mixing/preparation center, cooking utensils near the range, and dish storage near the sink for example. Finally, add up the materials you'll need - cabinets, counter tops, appliances, electrical, plumbing and heating supplies, light fixtures, fan, and all the surface materials such as floor coverings, wallboard, wallpaper and paint.

© Copyright 2008 - Kight Home Center 5521 Boonville Highway / Evansville, IN / 47715 / 812-479-8281 1109 Highway 662 / Newburgh, IN / 47630 / 812-853-3361 Highway 62 at 231 / Rockport, IN / 47624 / 812-649-5044 831 Alsop Lane / Owensboro, KY / 42430 / 502-685-5000